Monday, 15 May 2017

A Whale's Tale for Stampendous


Our theme at Stampendous this week is 'Under the Sea' and for this make I used one of my favourite stamps from the new release, Stylised Whale; I love the 'Zentangle' detail on this stamp. I chose to use it slightly differently, focussing on just the tail. I'm lucky enough to have been whale watching and this bit is about all you get to see coming up through the waves!

Here's how I made it:

1 Colour some book pages with spray inks and sprinkles of FX powder in tones of blue and green. 

2 Draw wavy shapes at random and cut along the lines. Edge each piece with Dreamweaver Embossing Paste using a palette knife to simulate white water in the waves.

3Cover a Tando board with book paper then add white gesso and some light areas of ink. 

4 Colour (I used alcohol markers) and cut out the whale; also stamp and cut out a Laurel Burch sentiment. 

5 Assemble as shown adding the whale behind the book page 'waves'. Use some silicone adhesive behind the whale’s tail to lift it slightly. Glue the sentiment in place.


Products used:
Stampendous Cling Stamp: Stylized Whale
Stampendous Laurel Burch Perfectly Clear Stamp: Geo Floral Wishes
Dreamweaver Embossing Paste - Regular
Dreamweaver FX Powders
Tando Creative Media Board

You can see my project and get a print-friendly version here on the Stampendous website.

Thanks for stopping by,
Katy x

Friday, 28 April 2017

Guesting at Canvas Corp Brands


I was lucky enough to be asked (thank you Ewelina!) to be a featured blogger for Canvas Corp Brands and was sent a package of lovely goodies from the new 7gypsies Architextures range.


You can see my pieces in full, including step-outs, on their blog today.

Katy x

Wednesday, 26 April 2017

Two Minute Journal Page Background


Today I'm sharing the results of a challenge set by my dear friend Lou Withers on her Facebook group Junk Journal Junkies (check it out - it's a very friendly, happy place!). The challenge was to create a background for a journal spread in two minutes. Of course I turned to my favourite DecoArt Fluid Acrylics and bashed this page out!

In fact it only took 15 minutes to complete the whole thing and I'm actually really happy with it. Sometimes just going with the flow can really work (and sometimes I make something unspeakable!).


Hope you enjoy the video. See you soon.

Katy x

Products used:
DecoArt Media Fluid Acrylics: Green Gold, Cobalt Teal Hue, Payne's Grey, Cobolt Turquoise Hue
Dina Wakley stamps
Washi tape

Thursday, 20 April 2017

ATC Triptych for DecoArt Media


I've got a video to share today using DecoArt product which shows you a couple of different ways you can make use of your stencils. This is a variation on a make-&-take project I originally created for the Ministry of Mixology retreat last year. It uses chipboard ATCs from Tando as they are nice and sturdy and don't mind the layers of wet media.


Products used:
DecoArt Media Fluid Acrylics: Cobalt Teal Hue, Cobalt Turquoise Hue, Pyrrole Red, Metallic Silver
DecoArt Media Gesso - White
DecoArt Media Tinting Base
DecoArt Americana Decou-page - Matte
DecoArt Andy Skinner Stencils: Halftone, Timewarp
Stampendous Andy Skinner stamps: Curiosity, Handle with Care
Stampendous Frantage: Pearlised Mica Flake
Tando Creative: ATCs
Chipboard heart, metal embellishment and washi tape


Thanks for stopping by!
Katy x

Monday, 20 March 2017

Chipboard Pendant for DecoArt


I used to do a lot of jewellery making but I kind of got out of the habit (and frankly I don't get enough time to do one hobby let alone two!). But there is something really nice about wearing pieces that you've made yourself so today I've combined mixed media with jewellery to create a chipboard pendant. Chipboard is cheap, lightweight and easy to work with. A couple of coats of gloss varnish make the piece relatively sturdy to wear - but avoid going out in a monsoon as it's still basically made of paper!

DecoArt products used:
Media Fluid Acrylics - Pyrrole Red, Pyrrole Orange
Media Gesso - White
Metallic Lustre - Gold Rush
Media Varnish - Gloss


Other:
Tando Creative Chipboard (from their offcuts pack)

Crafter's Companion Stamps by Deborah Wainwright
Permanent black inkpad

White paint pen
Printed word

Here's how I made it:

1) Cover the chipboard piece with white gesso front and back to prime it.
2) Apply red and orange paints randomly with your fingers to get a two-tone background. Repeat on the back.
3) Allow to dry then stamp over with an image in black ink and apply a printed word. Also stamp a partial image to the back to finish it off neatly.
4) Apply two coats of gloss varnish, allowing drying time between coats.
5) Finish with dots of white paint pen and gold lustre all around the edge.
6) Add a glue bail and some faux suede cord if you want to wear it - or use an embellishment if you don't!

Katy x

Friday, 17 March 2017

Stampendous/DecoArt Blog Hop - Handle with Care


It's the last day today of our our joint Stampendous/DecoArt Blog Hop and I'm sharing a mini journal page with you. I recently treated myself to a tiny weeny Moleskine watercolour journal and I love working in it - the small size is perfect for quick journaling or journaling on the go. I'm using this specific journal for mindfulness and self-care so there is a theme running through it which is echoed in the sentiment on this page - a reminder to be gentle with myself!


Prizes!!!!! Comment to win one of three HUGE prize packages that includes Andy Skinner stamps and DecoArt Media™ Paint plus more!  US winners only, see Stampendous Official Contest Rules here for more details.

Today's Hop List:

Stampendous Blog

Pam Bray

Jamie Martin

Louise Healy

Asia King

Janelle Stollfus

Lea Fritts

Alison Heikkila

DecoArt Blog



Here's how I made it (apologies for the state of the photos - it was late at night!):

1 Use a paintbrush, bottle lid and credit card to make marks in Payne's Grey paint onto the journal page (this is a technique I learned in Nathalie Kalbach's Creative JumpStart and I love it!)

2 Apply Cobalt Teal Hue and Cobalt Turquoise Hue paints over the top - the Fluid Acrylics from DecoArt are translucent and let all those lovely marks show through!

3) Colour a die cut heart with Pyrrole Red paint. When dry, stamp with the heart from the Handle with Care set to add texture.

4) Add random background stamping using Andy's Steampunk set. Add stencilled dots using the Pixelated stencil from DecoArt. Draw around the heart die cut with a Stabilo All pencil and blend out the pencil to create a shadow. Add scribbly lines with a paint pen.

5) Glue the heart in place and doodle around with white paint pen. Stamp the sentiment from the set and cut it up. Ink the edges to distress before sticking it in place.

Thanks for your visit today! Don't miss the other blogs.

Katy x

Thursday, 16 March 2017

DecoArt/Stampendous Blog Hop - Specimen2675



Welcome to day four of the Stampendous/DecoArt blog hop - hope you've been enjoying all the inspiration so far! Today I've used Andy's Skulldoggery stamp set to create a kind of faux fossil effect on a tag.

Comment for a chance to win one of three HUGE prize packages that includes Andy Skinner stamps and DecoArt Media™ Paint plus more! US winners only, see Stampendous Official Contest Rules here for more details.

Here's the hop list for today:

Stampendous Blog

Louise Healy

Elly Pirally

Lea Fritts

DecoArt Blog


Sorry, I didn't manage to take any step pictures of this but briefly here's how I made it:
1 Cut a tag from mixed media or watercolour paper - something that can take wet media.
2 Squeeze drops of Yellow Oxide, Burnt Sienna and Raw Umber paints onto a craft sheet or other non-stick surface. Spray generously with water.
3 Swipe the tag into and through the paints - lightly so as not to over-mix the colours. Dry and repeat until you like the result. I was aiming for a look similar to natural rock (did I manage it?).
4 Stamp and heat emboss the skull stamp with white Stampendous embossing powder. When cool, add a wash of Yellow Oxide paint to tone down the white a little bit and blend the skull into the tag.
5 Finally stamp the wording in black, distress the edges of the tag and mat onto black cardstock.

Katy x

Thursday, 9 March 2017

Poppy Canvas for DecoArt


Here's a sneak peek of my poppy canvas, appearing on the DecoArt Media Blog today with a full step-by-tutorial. Hope you enjoy it!

Katy x

Tuesday, 7 March 2017

Butterfly Effect for Stampendous


Today I'm sharing something a bit different, a jewellery piece I created using Frantage Embossing Enamels. The basis of my pendant is an old domino - they make great working surfaces for a project like this as they can take a ton of heat. I called my piece 'The Butterfly Effect' as the swirls and colours have kind of a chaotic, turbulent feel.

Stampendous products used:
Cling Stamp: Starry Swirls (CRR284)
Frantage Embossing Enamels: Aged Teal, Aged Marine, Aged Wine
Versamark Watermark Inkpad

Other:
Domino
Glue bail
Butterfly charm (mine's from Vintaj)

Here's how I made it:

1 Cover a domino well with Versamark. Also ink up your stamp with Versamark ready for step 3.

2 Sprinkle with different colours of powder in different areas and heat. If the surface is lumpy add a little more powder and reheat until smooth.

3 Working quickly while the powder remains hot, press the pre-inked rubber stamp into the molten powder. Leave for a few seconds to cool a little before peeling away to reveal the design. 

To finish: Use a silver permanent pen (e.g. Krylon) to colour the edges. Add the bail and butterfly embellishment and it's done!

Katy x

Wednesday, 1 March 2017

DecoArt Andy Skinner Blog Hop


Prepare for dark and maybe even scary this week as DecoArt and Stampendous join forces and we get to play with Andy Skinner's fantastic new stamps!

I've had a lifelong fear of clowns... not totally sure why... Could be that I had a Jack-in-the-Box when I was very small that terrified the life out of me. Could be that I got addicted to serial killer books (still am) at an inappropriately young age - John Wayne Gacy - shudder......... Whatever the reason, I hate clowns! So there was only one way to go with Andy's skull with clown nose stamp and that was cathartic! As I started to express my fears my journal page got a little bit macabre; sorry about that! But if I haven't scared you away yet, here's a step-by-step tutorial of how I created my journal page.


DecoArt products used:
Media Crackle Paste
Media Crackle Glaze
Media Antiquing Cream - Black, White
Fluid Acrylics - Payne's Grey, Dark Grey Value 3, Carbon Black, Pyrrole Red
DecoArt Stencil:

Other products:
Stampendous Andy Skinner Stamps
Permanent black inkpad

1) Apply crackle paste through a stencil and allow to dry. Once dry, use a dry brush to roughly apply Payne's Grey and Dark Grey paints.

2) Add some drips of Payne's Grey paint.

3 Stamp the skull with permanent ink. Add some shadowing with a wash of grey paint and paint the nose red. Cover with Crackle Glaze.

4) Allow the glaze to dry fully and cut out the skull. Mix black and white Antiquing Creams to make dark grey and apply all over. Allow to dry.

5) Wipe back the cream with a baby wipe or damp cloth - I wiped most of it away so it was just in the crackles.

6) Place the skull onto your page and draw around it with a pencil. Use the pencil marks as a guide to create a Payne's Grey frame around the area where the skull will go. Mine dripped a bit so I went with it, as it echoed the drips above.

7) Add more stamped detail using the barbed wire image and permanent black ink.

8) Add some splatters of black paint (I used a wooden skewer for this) and stamp the word 'Fear'. At this point I wanted some more contrast so added some red paint drips.

9) To finish glue the skull in place and add some computer-generated wording.

Normal prettiness will be resumed shortly but in the meantime thanks for your visit today! I hope you're not too scared to come back!!!

Katy x

Tuesday, 28 February 2017

Stampendous Stencil Week - Vintage Box


This is one of my favourite Dreamweaver stencils and I love the vintage look of it on my altered box. This project started life as a cheap plywood box from the craft store, transformed with a little paint and Embossing Paste into a treasure box fit for something special!

Stampendous products used:
Dreamweaver Antique Keys Metal Stencil (FMFMS4053)
Dreamweaver Embossing Paste: Copper, Gold

Other:
Metal embellishments
Treasure Gold Gilding Wax
Brown paint



Here's how I made it:
1) Paint the box with raw umber paint all over. Wipe back in some areas to distress.
2) Place the stencil on top of the box -stencil through with both Copper and Gold Embossing Pastes, randomly applying them and allowing them to mix in places. The stencil doesn't quite cover the box so I waited for that to dry before adding additionally stencilling in the gap.
3) Add gilding wax around all the edges using your finger - I used a gold and copper shade to match the embossing.
4) Finish with metal embellishments (I also treated these with a little Treasure Gold).

Thanks for visiting!
Happy creating,
Katy x


Saturday, 25 February 2017

Take My Hand for DecoArt


Today I've created a very layered journal page using my Media supplies for the DecoArt Media DT. I love working with lots of layers, with just a hint of what went before peeking through each time. I think it gives a piece lovely depth and interest and it's a fun way to work too. I also like how the translucency of the Fluid Acrylics means that the dark grey background doesn't entirely cover my other layers, and elements peek through. I created a step-by-step to show you my process.


DecoArt products used:
Media Fluid Acrylics: Green Gold, Cobalt Teal Hue, Payne's Grey
Media Matte Medium
Media Gesso - White
Decou-page Paper: Moroccan
Find all these products at decoart.com

Other:
Permanent black inkpad
Oil pastel in turquoise
Stabilo All Pencil
Masks (Donna Downey)


Scrape Green Gold paint over a journal page. Add Cobalt Teal Hue stamped with a piece of bubble wrap.

Apply some pieces of tissue and Decou-page paper using Matte Medium.

Add areas of white gesso all over. Add some stamping randomly using both Teal paint and black ink.

Add more Green Gold paint over the white areas.

Add some scribbles using an oil pastel or similar.

Add some further 'stamping' with bottle lids and bubble wrap using white gesso.

Scrape some white gesso onto the background using a credit card. This was the finished background before applying the grey all over.

Place the masks and sponge all around them with Payne's Grey. Blot the paint back in some areas so it's patchy (also the pastel resists the paint a little too). Outline the figures in Stabilo All pencil and add water to give the shapes more definition. Finish with scribbly journaling (it's personal - you're not supposed to be able to read it, hence the scribbly hand!).

I hope I've shown you today how lots of layers can create read interest in your designs, even when you limit yourself to a small number of supplies.

See you soon!
Katy x

Monday, 20 February 2017

Take Risks for DecoArt Media DT


My post for DecoArt Media today is a fairly quick one as I've been suffering with a bit of creative block this month. I've called my tag 'take risks' as I've had a go with colours I wouldn't normally touch! Pink and purple are sooooooooooooo not me. I've also been mastering my drippage technique (video soon) and this tag was a lot of fun to create.


DecoArt products used:
Media Fluid Acrylics: Cobalt Teal Hue, Primary Magenta, Dioxidine Purple
Media Modeling Paste - White
Andy Skinner Stencil - Alphabet Spaghetti

Other:
Butterfly stamps and dot stamp
Printed words (these were a freebie with Mixed Up magazine)
Doily
Brad
Black pen
Twine

Here's how I made it:
1) Randomly cover a tag with the three paint colours using a brayer. Don't over-mix the colours.
2) Stencil over the top using the Andy Skinner stencil and white modelling paste.
3) When completely dry, apply drips of Magenta and Teal paints down the tag.
4) Paint some card with Cobalt Teal Hue paint and stamp with two butterfly images (Prima). Over-stamp with Magenta paint and a dot stamp to add detail. Apply to the tag with a doily underneath.
5) Add printed words, some twine and some doodles created with a fine black pen.

Thanks for stopping by today!
Katy x

Sunday, 5 February 2017

Abstract Valentine's Cards for DecoArt Media


Welcome all to my latest post for the DecoArt Media DT. For this project I've created some non-traditional Valentine's cards using Fluid Acrylics and I have a video tutorial to share with you.



One of my resolutions for 2017 was to try to free up my creative process and this video is part of that exploration. I've been free and easy with the paint to create layered backgrounds using bold brush strokes and mark making tools - I've used junk from around the house (like bubble wrap and bottle lids) but you could use stamps if you prefer something more precise. This may be the first time ever that a resolution has lasted into February!!!


One tip when creating this way is to stick to a relatively limited colour palette as too many colours will make mud. I've essentially used primary colours here - but chosen muted versions of the blue and yellow tones for a more sophisticated vibe.


I hope you like my video tutorial and have a go a cards like these for yourself.

See you soon!

Katy x